A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

Factors associated with driving under the influence of alcohol

Objective: This study examined the risk factors of driving under the influence of alcohol (DUI) among drivers of specific vehicle categories (DSC). On the basis of this research, the variables related to DUI and involvement in traffic crashes were defined. The analysis was conducted for car drivers, bicyclists, motorcyclists, bus drivers, and truck drivers.

Method: The research sample included drivers involved in traffic crashes on the territory of Serbia in 2016 (60,666). Two types of analyses were conducted in this study. Logistic regression established the correlation between DUI and DSC and the The Technique for Order of Preference by Similarity to Ideal Solution (Multi-criteria decision making) method was applied to consider the scoring and explore the potential for the prevalence of DUI on the basis of 2 data sets (DUI and non DUI).

Results: The study results showed that driver error and male drivers were the 2 most significant risk factors for DUI, with the highest scores and potential for prevalence. The nonuse of restraint systems, driver experience, and driver age are the factors with a significant prediction of involvement in an accident and an insignificant prediction of DUI.

Conclusions: Following the development of the logistic prediction models for DUI drivers, testing of the model was conducted for 3 control driver groups: Car, motorcycle, and bicycle. The prediction model with a probability greater than 50% showed that 77% of car drivers were under the influence of alcohol. Similarly, the prediction percentage for motorcyclists and bicyclists amounted to 71 and 67%, respectively. The recommendation of the study is that drivers whose DUI probability is above 50% should be potentially suspected of DUI. The results of this study can help to understand the problem of DUI among specific driver categories and detect DUI drivers, with the aim of creating successful traffic safety policy.     

官方媒体参与下不同风险感知群体竞争模型及其演化规律

为识别公众风险感知的演化规律和官方媒体参与的作用机制，首先，根据公众的行为表现划分不同风险感知群体，并分析群体间的相互竞争和官方媒体的扰动作用；然后，通过扩展Lotka Volterra模型建立群体间的相互竞争模型；在此基础上，通过推导模型平衡点及其稳定性分析模型演化规律；最后，运用数值仿真考查了官方媒体的参与对模型演化的影响。研究结果表明:模型演化具有3种结果情景，官方媒体参与能够显著改变模型演化的速度和结果。     

基于双指标多等级的土壤重金属生态风险评价

采用土壤中重金属的全量和有效态双重指标,建立基于多等级综合评估的土壤中重金属生态风险评价模型,将联合概率曲线法引入土壤评价模型,分析重金属暴露浓度与毒性数据的概率分布,考察重金属对土壤生物的毒害程度,从而确定土壤中重金属对于生态系统的风险。建立从简单到复杂的多等级综合评价方法,表征重金属的污染等级、浓度效应、多种重金属污染物的协同效应、不同重金属的毒性效应和土壤对不同重金属污染物的敏感性。选择典型地区采集有代表性的土壤样品,测定不同重金属的总量和有效态,验证评价模型的实用性和评价分级的合理性。旨在解决土壤重金属风险评价的方法学问题,为土壤环境质量管理提供支持。     

天津市地表水体与沉积物中7种高关注酚类化合物的污染特征与生态风险分析

为探究地表水体与沉积物中酚类化合物的污染分布特征和生态风险,选择天津市3个水源地与6条主要河流,采集了26个地表水样与6个沉积物样品,利用固相萃取与超声萃取、高效液相色谱-串联质谱法(HPLC-MS/MS)测定了水样及沉积物中1-萘酚(1-naphthol)、壬基酚(nonylphenol, NP)、双酚A(bisphenol A, BPA)、2-苯基苯酚(biphenyl-2-ol)、3,4-二氯酚(3,4-dichlorophenol)、四溴双酚A(tetrabromobisphenol A, TBBPA)和对叔丁基苯酚(p-tert-butylphenol, PTBP)等7种高关注酚类化合物的浓度水平,并应用物种敏感性分布(species sensitivity distribution, SSD)法和熵值法(ecological risk quotient, RQ)评估7种酚类化合物水环境和沉积物的生态风险。结果表明,地表水样中7种酚类化合物均全部检出;其中壬基酚的检出浓度最高,其次为四溴双酚A、对叔丁基苯酚、1-萘酚、2-苯基苯酚、3,4-二氯酚和双酚A。沉积物中酚类化合物的污染分布规律与水样相似,除双酚A外的目标物全部检出。其中,壬基酚浓度比其他物质浓度高2个数量级。风险评估结果显示,壬基酚对水环境与沉积物存在不可接受的风险;而四溴双酚A、对叔丁基苯酚、1-萘酚、2-苯基苯酚、3,4-二氯酚和双酚A则对环境具有较低风险或者存在一定的风险。     

基于模糊推理的FRAM事故定量分析方法研究

为有效克服FRAM事故分析中无法进行定量分析的缺陷，提出结合模糊推理技术的Fuzzy FRAM模型。此改进模型基于FRAM识别系统运行状态；依据功能输出要素的时间/精度属性利用Matlab构建2阶模糊推理系统量化功能输出质量；根据通用性能条件(CPC)及功能输入耦合端口构建功能评价体系，针对评价体系中存在的不确定性信息融合及建模问题，采用模糊证据推理技术，通过模糊信度结构建立、数据处理、信息融合测度后获得功能的风险指数;以既有铁路危险品运输事故为例，验证方法的可行性。结果表明:Fuzzy FRAM模型的评估结果较为精确，是FRAM分析方法的有效补充。     

瑞典环境法法典化对我国的启示

在《瑞典环境法典》编纂之前,其《环境保护法》存在诸多问题,如:指导性不强、威慑力不足、过于抽象、各环境法律法规之间存在重叠与冲突等,为了使环境领域的立法实现体系化并促进可持续发展,瑞典开始编纂《环境法典》。《瑞典环境法典》采取适度法典化的编纂模式,在编纂过程中注重本土化和国际化的有效结合,最后形成"以法典法为主,辅之以单行法"的环境法律体系。通过对瑞典环境法法典化的特点及原因进行深入研究,并结合我国环境保护领域的立法现状可以得知,我国环境立法应采取适度法典化的立法模式:编纂环境法典应分阶段进行,而不是一蹴而就;应以形式化法律汇编作为起点,逐步向实质性法典编纂迈进。此外,还要加强环境法典编纂的理论研究为法典编纂提供充足的理论支撑。     

环境司法专门化下的特殊环境诉讼规则

我国的环境司法处于发展初期,有关环境纠纷的司法救济程序散落在不同的部门法中。为了维护国家环境安全和公共环境利益,构建环境司法专门化势在必行,但是在特殊的环境保护法院进行专门化的环境审判过程中,出现环境诉讼保护对象的争议性、生态环境损害责任承担的特殊性等问题亟待解决,环境民事公益诉讼和生态环境损害赔偿诉讼等特殊环境诉讼规则应运而生,虽然目前还面临着一些困境,但是整体上构建环境司法体系的进程依然在不断推进。     

Study on explosion risk of aluminum powder under different dispersions

This paper mainly studied the influence of particle size distribution on the explosion risk of aluminum powder under the span of large particle size distribution. The measurement was carried out with the 20 L explosion ball and the Hartmann tube. The statistical analysis was used to analyze the relevance between the parameters of explosion risk and the particle size parameters. Test results showed that with the increase of particle size, the sensitivity parameter increases and the intensity parameter deceleration decreases. The effect of particle size change on MEC and MIE of small particle size aluminum powder is relatively small but greater impact on Pm and (dP/dt)m. The small particle size components greatly increasing the sensitivity of the explosion and accelerating the rate of the explosion reaction; while the large particle size component contributes to the maximum explosion pressure. D_3,2 particle size dust determines the risk of aluminum powder explosion.     

锂电池检测的安全标准及安全防护研究

为评估并提高锂电池在使用、储存和运输过程中的安全,本文归纳总结了国内外锂电池安全检测的相关标准,对标准中测试项目异同作了重点分析和对比,并讨论了锂电池的安全风险及风险分级情况。同时,鉴于锂电池检测过程中可能出现的起火、爆炸等危险,探讨了电池检测过程的安全防护技术,并从样品区和试验区两方面提出了安全防护要求和建议。